3.4 MDB Assembly Service (EP9 MDB)Updated 6 minutes ago
Figure 11
Follow steps 1-5 from the Disassembly Instructions for Normal Cleaning and Maintenance. The MDB assembly can be removed by tilting the lower receiver forward while simultaneously holding the hammer depressed past the cocked position. This will allow the MDB assembly to be easily removed from the receiver extension. (fig 11) Cleaning and lubrication is recommended every 2000 rounds. Please watch the instructional video detailing this procedure on our website. extarusa.com/mdbservice
Figure 15
← Previous: 3.3 Reassembly | Complete Owner’s Manual | Next: 3.5 Muzzle Devices & Handguard →